2020 Husqvarna FC250 vs 2023 Yamaha YZ250
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Colours | White/yellow/blue | Team Yamaha Blue |
| Warranty | - | 30 Day Limited Factory Warranty |
| Dimensions |
| Ground Clearance (in.) | 14.6 inches | 14.2 inches |
| Ground Clearance (mm) | 370 mm | 361 mm |
| Seat Height | 950 mm / 37.4 in. | 975 mm / 38.4 in. |
| Wheelbase | 1482 mm / 58.3 in. | 1481 mm / 58.3 in. |
| Height | - | 1290 mm / 50.8 in. |
| Length | 2260 mm / 89.0 in. | 2184 mm / 86.0 in. |
| Width | - | 826 mm / 32.5 in. |
| Weights & Capacities |
| Oil Capacity (Quarts) | - | 0.85 US quarts |
| Oil Capacity (l) | - | 0.80 litres |
| Dry Weight | 99.5 kg / 219.4 lbs | - |
| Fuel Capacity | 7.00 litres / 1.85 US gallons | 8.00 litres / 2.11 US gallons |
| Wet Weight | - | 103.0 kg / 227.0 lbs |
| Performance |
| Power-to-Weight Ratio | 0.4623 HP/kg | - |
| Engine |
| Bore x Stroke (mm) | 78.0 x 52.3 mm | 66.4 x 72.0 mm |
| Displacement (cc) | 249.9 cc | 249.0 cc |
| Displacement (ci) | 15.25 cubic inches | 15.19 cubic inches |
| Engine Type | Single cylinder, four-stroke | Single cylinder, two-stroke |
| Fuel Control | Double Overhead Cams/Twin Cam (DOHC) | - |
| Bore x Stroke (in,) | 3.1 x 2.1 inches | 2.6 x 2.8 inches |
| Engine Detail | - | Reed-valve inducted |
| Fuel System | Carburettor | Carburettor. Hitachi Astemo® Keihin PWK38S |
| Compression Ratio | - | 10.6:1 |
| Engine Lubrication | - | Premix |
| Ignition | Keihin EMS | CDI |
| Starter | Electric | Electric |
| Drivetrain |
| Clutch | Wet, multi-disc clutch, Magura hydraulics | - |
| Final Drive | Chain (final drive) | Chain (final drive) |
| Gearbox | 5-speed | 5-speed |
| Primary Drive | - | Constant-mesh |
| Chassis |
| Frame Type | 25CrMo4 steel central-tube | Semi-double cradle, aluminium |
| Suspension - Front | WP-USD, AER 48, Ø 48 mm | KYB® Speed-Sensitive System inverted fork; fully adjustable |
| Suspension - Rear | WP Monoshock with linkage | KYB® single shock; fully adjustable |
| Rake | 26.1° | 27.7° |
| Trail | - | 122 mm / 4.8 in. |
| Wheel Travel - Front | 310 mm / 12.2 in. | 300 mm / 11.8 in. |
| Wheel Travel - Rear | 300 mm / 11.8 in. | 315 mm / 12.4 in. |
| Wheels & Brakes |
| Brakes - Front | Single disc. Brembo twin-piston floating calliper | Single disc |
| Brakes - Rear | Single disc. Brembo single-piston floating calliper | Single disc |
| Rims | - | Dunlop® Geomax MX33 tyres |
| Tyres - Front | 90/90-21 | 80/100-21 |
Verdict
🏆
Winner on specs
2020 Husqvarna FC250
The 2020 Husqvarna FC250 edges out the 2023 Yamaha YZ250 thanks to its lower seat height. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2020 Husqvarna FC250 - Advantages
- 📏Lower seat height: 950 mm vs 975 mm - accessible to a wider range of rider heights.
2023 Yamaha YZ250 - Advantages
- ✓Competitive all-round: The 2023 Yamaha YZ250 matches or exceeds its rival across all measured criteria.
2020 Husqvarna FC250 vs 2023 Yamaha YZ250 - FAQs
What are the engine differences between the 2020 Husqvarna FC250 and 2023 Yamaha YZ250?
The 2020 Husqvarna FC250 uses Single cylinder, four-stroke, while the 2023 Yamaha YZ250 is powered by Single cylinder, two-stroke. This is a fundamental difference - the 2020 Husqvarna FC250 is a four-stroke engine while the 2023 Yamaha YZ250 runs a two-stroke, resulting in very different power delivery, maintenance requirements, and riding character.
Which bike is better for shorter riders, the 2020 Husqvarna FC250 or the 2023 Yamaha YZ250?
The 2020 Husqvarna FC250 has the lower seat at 950 mm, making it more accessible. The 2023 Yamaha YZ250 sits higher at 975 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2020 Husqvarna FC250 or the 2023 Yamaha YZ250?
Both are strong choices. The 2020 Husqvarna FC250 has the edge in lower seat height, while the 2023 Yamaha YZ250 offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.