2020 KTM 125 SX vs 2022 Honda XR 150L
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | - | Sold in Australia. |
| Colours | White, Orange | Red/white |
| Warranty | - | 12 months |
| Dimensions |
| Ground Clearance (in.) | - | 9.6 inches |
| Ground Clearance (mm) | - | 245 mm |
| Seat Height | - | 825 mm / 32.5 in. |
| Wheelbase | - | 1360 mm / 53.5 in. |
| Height | - | 1125 mm / 44.3 in. |
| Length | - | 2090 mm / 82.3 in. |
| Width | - | 810 mm / 31.9 in. |
| Weights & Capacities |
| Dry Weight | 137 kg / 302.0 lbs | - |
| Wet Weight | - | 130.0 kg / 286.6 lbs |
| Performance |
| Max Torque | - | 12.5 Nm (1.3 kgf-m or 9.2 ft.lbs) @ 6000 Revolutions" |
| Power-to-Weight Ratio | 0.1095 HP/kg | - |
| Engine |
| Bore x Stroke (in,) | 2.1 x 2.1 inches | 2.3 x 2.3 inches |
| Bore x Stroke (mm) | 54.0 x 54.5 mm | 57.3 x 57.8 mm |
| Displacement (cc) | 124.8 cc | 149.0 cc |
| Engine Type | Single cylinder, two-stroke | Single cylinder, four-stroke |
| Displacement (ci) | 7.62 cubic inches | 9.09 cubic inches |
| Fuel Control | Double Overhead Cams/Twin Cam (DOHC) | - |
| Fuel System | Injection | Carburettor |
| Compression Ratio | - | 9.5:1 |
| Engine Lubrication | Wet sump | - |
| Ignition | Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment, type Kokusan | - |
| Starter | Electric | Electric & kick |
| Valve System | - | 2 |
| Drivetrain |
| Clutch | Wet multi-disc clutch, mechanically actuated | - |
| Final Drive | Chain (final drive) | Chain (final drive) |
| Gearbox | 6-speed | 5-speed |
| Primary Drive | 5/8 x 1/4 (520) O Ring. Primary drive: 22:72. | - |
| Chassis |
| Frame Type | Central double-cradle | - |
| Suspension - Front | WP upside-down Ø 48 mm | Telescopic fork |
| Suspension - Rear | WP Monoshock | Single Shock |
| Trail | - | 150 mm / 5.9 in. |
| Wheel Travel - Front | - | 180 mm / 7.1 in. |
| Wheel Travel - Rear | 150 mm / 5.9 in. | 152 mm / 6.0 in. |
| Wheels & Brakes |
| Brakes - Front | Single disc | Single disc |
| Brakes - Rear | Single disc | Expanding brake (drum brake) |
| Tyres - Front | 110-17 | 70/100-19 |
Verdict
🏆
Winner on specs
2020 KTM 125 SX
The 2020 KTM 125 SX edges out the 2022 Honda XR 150L thanks to its fuel injection. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2020 KTM 125 SX - Advantages
- 🔧Fuel injection: Precise fuelling, better cold-start reliability, and lower maintenance requirements.
2022 Honda XR 150L - Advantages
- ✓Competitive all-round: The 2022 Honda XR 150L matches or exceeds its rival across all measured criteria.
2020 KTM 125 SX vs 2022 Honda XR 150L - FAQs
What are the engine differences between the 2020 KTM 125 SX and 2022 Honda XR 150L?
The 2020 KTM 125 SX uses Single cylinder, two-stroke, while the 2022 Honda XR 150L is powered by Single cylinder, four-stroke. This is a fundamental difference - the 2020 KTM 125 SX is a two-stroke engine while the 2022 Honda XR 150L runs a four-stroke, resulting in very different power delivery, maintenance requirements, and riding character.
Which should I buy, the 2020 KTM 125 SX or the 2022 Honda XR 150L?
Both are strong choices. The 2020 KTM 125 SX has the edge in fuel injection, while the 2022 Honda XR 150L offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.