2026 KTM 690 SMC R vs 2023 Honda NC750X DCT

Full specifications comparison • 2 motorcycles

Comparing 2 motorcycles
2026 KTM 690 SMC R 2026 KTM 690 SMC R

Super motard

Engine
Single cylinder, 4-stroke, SOHC, 4-valve
Power
79 hp / 58.1 kW
Top Speed
N/A
Weight
162 kg / 357 lbs
2023 Honda NC750X DCT 2023 Honda NC750X DCT

Super motard

Engine
Twin, four-stroke
Power
N/A
Top Speed
N/A
Weight
493.0 pounds
Full Specifications
General
Comments-Throttle By Wire. power-delivery modes: Standard, Rain, Sport, and a customizable setting. Model id NC750XD.
Year2026-
Colours-Matte Nightshade Blue
Make ModelKTM 690 SMC R-
Warranty-One year transferable, unlimited-mileage limited warranty.
Dimensions
Ground Clearance (in.)-5.7 inches
Ground Clearance (mm)-145 mm
Storage-23-liter utility compartment
Seat Height899 mm / 35.4 in803 mm / 31.6 in.
Wheelbase1476 mm / 58.1 in1527 mm / 60.1 in.
Ground Clearance237 mm / 9.3 in-
Height-1330 mm / 52.4 in.
Length-2210 mm / 87.0 in.
Width-846 mm / 33.3 in.
Weights & Capacities
Oil Capacity (l)-4.00 litres
Oil Capacity (Quarts)-4.23 US quarts
Fuel Capacity13.3 Litres / 3.5 US gal14.38 litres / 3.80 US gallons
Wet Weight162 kg / 357 lbs223.6 kg / 493.0 lbs
Performance
Max Power79 hp / 58.1 kW-
Max Torque73 Nm / 54 lb-ft 69.0 Nm (7.0 kgf-m or 50.9 ft.lbs) @ 4750 Revolutions"
Engine
CO2-81.2 CO2 g/km. (CO2 - Carbon dioxide emission)
Bore x Stroke (mm)-77.0 x 80.0 mm
Displacement (ci)-45.46 cubic inches
Engine Type-Twin, four-stroke
Fuel Control-Single Overhead Cams (SOHC)
Bore x Stroke (in,)-3.0 x 3.1 inches
Displacement (cc)-745.0 cc
Displacement692.7 cc / 42.2 cu in-
Engine DetailSingle cylinder, 4-stroke, SOHC, 4-valve-
Fuel System-Injection. PGM-FI electronic fuel injection, 36mm
Compression Ratio-10.7:1
Cooling SystemLiquid cooled-
EmissionsEuro5 - 96 g/kmMeets current EPA standards. California version meets current CARB standards.
ExhaustStainless steel primary and secondary silencer-
Fuel Consumption-3.50 litres/100 km (28.6 km/l or 67.21 mpg)
Fuel InductionKeihin EFI (throttle body 50 mm)-
IgnitionKeihin EMS with RBW, double ignitionComputer controlled digital transistorised with electronic advance
Lubrication SystemPressure lubrication with 2 oil pumps-
StarterElectricElectric
Valve System-4
Drivetrain
ClutchAPTC slipper clutch, hydraulically actuatedDual-Clutch Transmission (DCT)
Final DriveChain, 520 X-RingChain   (final drive)
Gearbox-6-speed
Sprocket-16/43 (front/rear)
Transmission / Drive6-Speed-
Chassis
Frame TypeChrome-moly tubular space frame, powder-coatedDiamond; steel pipe
Suspension - Front48 mm WP APEX-USD, compression and rebound adjustableShowa 41mm telescopic fork
Suspension - RearWP APEX with Pro-Lever linkageMonoshock damper, Pro-Link swingarm
Handlebar808 mm wide rubber mounted-
Rake-27.0°
Steering Head Angle63.6°-
SubframeSelf-supporting plastic tank-
Trail110 mm / 4.3 in110 mm / 4.3 in.
Wheel Travel - Front224 mm / 8.8 in120 mm / 4.7 in.
Wheel Travel - Rear240 mm / 9.4 in107 mm / 4.2 in.
Electrical Systems
Lighting system-LED lights front and rear
Wheels & Brakes
Brakes - FrontSingle 300mm disc, Brembo four-piston radial fixed calliperSingle disc. ABS. Hydraulic. Two-piston calipers.
Brakes - RearSingle 240 mm disc, Brembo single piston floating caliperSingle disc. ABS. Hydraulic. Single-piston caliper.
ABSTwo-channel Bosch 9.1 MP ABS (incl. Cornering ABS and Supermoto mode Disengegable)-
Rims-Multi-Spoke Aluminium Cast
Tyres - Front120/70 ZR 17120/70-ZR17
Tyres - Rear160/60 ZR 17-
Wheels - FrontSpoked wheels with aluminum tubeless rims 3.50 x 17-
Wheels - RearSpoked wheels with aluminum tubeless rims 5.00 x 17-

Verdict

Winner on specs

2026 KTM 690 SMC R

The 2026 KTM 690 SMC R edges out the 2023 Honda NC750X DCT thanks to its liquid cooling, standard ABS, greater ground clearance, higher rear wheel travel and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.

Key Differences

2026 KTM 690 SMC R - Advantages

  • Liquid cooling: Consistent engine temperature in stop-start traffic and hot climates.
  • Standard ABS: A meaningful safety advantage in emergency braking on wet or loose surfaces.
  • More ground clearance: 237 mm vs 145 mm - better clearance over rocks and obstacles.
  • More rear wheel travel: 240 mm vs 107 mm - absorbs bigger hits and rough terrain better.
  • More front wheel travel: 224 mm vs 120 mm - greater compliance over rough surfaces.

2023 Honda NC750X DCT - Advantages

  • Lower seat height: 803 mm vs 899 mm - accessible to a wider range of rider heights.

2026 KTM 690 SMC R vs 2023 Honda NC750X DCT - FAQs

What are the engine differences between the 2026 KTM 690 SMC R and 2023 Honda NC750X DCT?
The 2026 KTM 690 SMC R uses Single cylinder, 4-stroke, SOHC, 4-valve, while the 2023 Honda NC750X DCT is powered by Twin, four-stroke.
Which bike is better for shorter riders, the 2026 KTM 690 SMC R or the 2023 Honda NC750X DCT?
The 2023 Honda NC750X DCT has the lower seat at 803 mm, making it more accessible. The 2026 KTM 690 SMC R sits higher at 899 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Does the 2026 KTM 690 SMC R or 2023 Honda NC750X DCT have ABS?
The 2026 KTM 690 SMC R is listed with ABS as standard. The 2023 Honda NC750X DCT does not list ABS. ABS provides a meaningful safety benefit in emergency braking on wet or loose surfaces.
Which should I buy, the 2026 KTM 690 SMC R or the 2023 Honda NC750X DCT?
Both are strong choices. The 2026 KTM 690 SMC R has the edge in liquid cooling and standard ABS, while the 2023 Honda NC750X DCT stands out for lower seat height. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.