| General |
| Year | 2021 | 2025 |
| Make Model | Triumph Bonneville Speedmaster | Harley Davidson Softail Fat Boy 117 |
| Dimensions |
| Seat Height | 705 mm / 27.8 in | Unladen 675 mm / 26.6 in Laden 658 mm / 25.9 in |
| Wheelbase | 1500 mm / 59.1 in | 1650 mm / 65 in |
| Ground Clearance | - | 125 mm / 4.9 in |
| Height | 1055 mm /41.5 in | 1120 mm / 44.1 in |
| Length | 2225 mm / 87.6 in | 2365 mm / 93.1 in |
| Width | 910 mm / 35.8 in | 965 mm / 40.0 in |
| Weights & Capacities |
| Wet Weight (kg) | 263 | 315 |
| Dry Weight (kg) | - | 303 |
| Dry Weight | - | 303 kg / 668 lbs |
| Fuel Capacity | 12 Litres / 3.2 US gal | 18.9 Litres / US 5.0 gal |
| Wet Weight | 263 kg / 580 lbs | 315 kg / 694 lbs |
| Performance |
| Max Power | 57.5 kW / 76.9 hp @ 6100 rpm | 77 kW / 104Hp @ 4800 rpm |
| Max Torque | 106 Nm / 78.2 lb-ft @ 4000 rpm | 171 Nm / 126 lb-ft @ 3000 rpm |
| Engine |
| Displacement | 1198 cc / 73.1 cu in | 1923 cc / 117 cu in |
| Engine Detail | Four stoke, parallel twin, 270° crank angle, SOHC, 4 valve per cylinder | Four stroke, V-Twin, 2 Milwaukee-Eight 117 custom, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder |
| Bore x Stroke | 97.6 x 80 mm | 103.5 x 114.3 in |
| Compression Ratio | 10.0:1 | 10.3:1 |
| Cooling System | Liquid cooled | Air cooled |
| Emissions | EURO5 | - |
| Exhaust | Chromed stainless steel 2 into 2 twin-skin exhaust system with chromed stainless silencers | 2-into-2 staggered, catalyst in muffler |
| Fuel Induction | Multipoint sequential electronic fuel injection | Electronic Sequential Port Fuel Injection (ESPFI) |
| Ignition | Digital | Single-fire, non-wasted, map-controlled spark ignition |
| Lubrication | Wet sump | Pressurized, dry-sump with oil cooler |
| Starter | - | Electric |
| Drivetrain |
| Clutch | Wet, multi-plate, torque assist clutch | Mechanical, 10 plate wet, assist & conventional |
| Final Drive | Chain | Belt, 32/66 ratio |
| Gear Ratios | - | 1st 9.311 / 2nd 6.454 / 3rd 4.793 / 4th 3.882 / 5th 3.307 / 6th 2.79 |
| Primary Drive | - | Chain, 34/46 ratio |
| Transmission / Drive | 6-Speed | 6 Speed |
| Chassis |
| Frame Type | Tubular steel, twin cradle frame | Mild steel, tubular frame, rectangular section backbone, stamped, cast, and forged junctions, MIG welded, aluminum forged fender supports |
| Suspension - Front | 47 mm Showa cartridge forks | Dual bending valve 49mm telescopic with aluminum fork triple clamps, dual rate spring, "beer can" covers |
| Suspension - Rear | Mono-shock RSU with linkage and preload adjustment | Hidden, free piston, coil-over monoshock, 43mm stroke, hydraulic preload adjustment |
| Lean Angle | - | 25.6° |
| Rake | 25.3° | 30° |
| Swingarm | Twin sided fabrication | Mild steel, tubular sections, stamped x-member, forged axle junctions, MIG welded, removable belt spacer |
| Trail | 91.4 mm / 3.6 in | 104 mm / 4.1 in |
| Wheel Travel - Front | - | 130 mm / 5.1 in |
| Wheel Travel - Rear | - | 86 mm / 3.4 in |
| Wheels & Brakes |
| Brakes - Front | 2 x 310mm disc, Brembo 2-piston sliding axial calipers | 2 x 300mm discs, 4 piston fixed caliper |
| Brakes - Rear | Single 255mm disc, Nissin single piston sliding axial caliper | Single 292mm disc, 2 piston floating caliper |
| ABS | Standard | Standard |
| Tyres - Front | 130/90-16 | 160/60R18,70V,BW |
| Tyres - Rear | 150/80-16 | 240/40R18,79V,BW |
| Wheels | - | Machined, Lakester cast aluminum |
| Wheels - Front | Wire 32-spoke, 16 x 2.5 in | 18 x 4,5 in |
| Wheels - Rear | Wire 32-spoke, 16 x 3.5 in | 18 x 8.0 in |