2008 Victory Hammer vs 2010 Honda VT1300CX
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Year | 2007 - 08 | - |
| Colours | - | Silver |
| Make Model | Victory Hammer | - |
| Dimensions |
| Seat Height | 660 mm / 26 in | - |
| Wheelbase | 1669 mm / 65.7 in | - |
| Ground Clearance | 135 mm / 5.3 in | - |
| Length | 2366 mm / 93.1 in | - |
| Weights & Capacities |
| Dry Weight | 305 kg / 672 lbs | - |
| Fuel Capacity | 17 Litres / 4.5 US gal | - |
| Engine |
| Engine Type | - | V2, four-stroke |
| Displacement (ci) | - | 79.33 cubic inches |
| Displacement (cc) | - | 1300.00 cc |
| Fuel Control | - | OHC |
| Displacement | 1634 cc / 100 cu-in | - |
| Engine Detail | Four stroke, 50° V twin SOHC, 4 valves per cylinder | - |
| Fuel System | - | Injection. PGM-FI |
| Bore x Stroke | 101 x 102 mm | - |
| Compression Ratio | 9.8:1 | - |
| Cooling System | Air / oil | - |
| Fuel Induction | Electronic Fuel Injection with 44mm throttle bodies | - |
| Starter | Electric | Electric |
| EV Specifics |
| Battery Capacity | 12 volts / 18 amp hours | - |
| Drivetrain |
| Clutch | Wet, multi-plate | - |
| Final Drive | Carbon Fiber Reinforced Belt | - |
| Transmission / Drive | 6 Speed | - |
| Chassis |
| Suspension - Front | 43mm Inverted cartridge telescopic fork | - |
| Suspension - Rear | Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage | - |
| Rake | 32.7° | - |
| Trail | 140 mm / 5.5 in | - |
| Wheel Travel - Front | 130 mm / 5.1 in | - |
| Wheel Travel - Rear | 100 mm / 3.9 in | - |
| Wheels & Brakes |
| Brakes - Front | 2x 300mm floating rotor 4 piston caliper | Single disc. Optional ABS |
| Brakes - Rear | Single 300mm floating rotor 2 piston caliper | Single disc. Optional ABS |
| Tyres - Front | 130/70 R18 | - |
| Tyres - Rear | 250/40 R18 | - |
| Wheels - Front | 18 x 3.5 in | - |
| Wheels - Rear | 18 x 8.5 in | - |
Verdict
⚖️
Too close to call
The 2008 Victory Hammer and the 2010 Honda VT1300CX are evenly matched across the key measurable criteria. Your decision comes down to personal preference, riding style, and which brand's dealer network best suits your location.
Key Differences
2008 Victory Hammer - Advantages
- ✓Competitive all-round: The 2008 Victory Hammer matches or exceeds its rival across all measured criteria.
2010 Honda VT1300CX - Advantages
- ✓Competitive all-round: The 2010 Honda VT1300CX matches or exceeds its rival across all measured criteria.
2008 Victory Hammer vs 2010 Honda VT1300CX - FAQs
What are the engine differences between the 2008 Victory Hammer and 2010 Honda VT1300CX?
The 2008 Victory Hammer uses Four stroke, 50° V twin SOHC, 4 valves per cylinder, while the 2010 Honda VT1300CX is powered by V2, four-stroke.
Which should I buy, the 2008 Victory Hammer or the 2010 Honda VT1300CX?
Both are strong choices. The 2008 Victory Hammer has its own strengths, while the 2010 Honda VT1300CX offers a compelling alternative. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.