2022 Yamaha PW50 vs 2023 KTM 50 SX Factory
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Comments | Intended for children. Easy-to-adjust throttle limiter. | Intended for children 4-10 years old. Special Factory Edition. |
| Colours | Team Yamaha Blue | White/orange/grey |
| Warranty | 90 Day Limited Factory Warranty | - |
| Dimensions |
| Ground Clearance (in.) | 3.7 inches | 9.9 inches |
| Ground Clearance (mm) | 94 mm | 252 mm |
| Wheelbase (in.) | 33.7 inches | - |
| Seat Height | 475 mm / 18.7 in. | 665 mm / 26.2 in. |
| Height | 706 mm / 27.8 in. | - |
| Length | 1245 mm / 49.0 in. | - |
| Width | 610 mm / 24.0 in. | - |
| Weights & Capacities |
| Dry Weight | - | 41.5 kg / 91.5 lbs |
| Fuel Capacity | 2.01 litres / 0.53 US gallons | 2.30 litres / 0.61 US gallons |
| Wet Weight | 41.0 kg / 90.4 lbs | - |
| Engine |
| Bore x Stroke (in,) | 1.6 x 1.5 inches | 1.6 x 1.6 inches |
| Bore x Stroke (mm) | 40.0 x 39.2 mm | 39.5 x 40.0 mm |
| Displacement (cc) | 49.0 cc | 49.0 cc |
| Displacement (ci) | 2.99 cubic inches | 2.99 cubic inches |
| Engine Type | Single cylinder, two-stroke | Single cylinder, two-stroke |
| Stroke | - | 2-stroke |
| Engine Detail | Reed-valve | Reed-valve |
| Fuel System | Carburettor. Mikuni VM12 | Carburettor |
| Compression Ratio | 6.0:1 | - |
| Engine Lubrication | Separate 2-stroke oil tank | - |
| Exhaust | - | FMF silencer |
| Ignition | CDI | Seletra 2p D36 EMS |
| Starter | Kick | Kick |
| Drivetrain |
| Clutch | Wet centrifugal automatic clutch | Centrifugal |
| Final Drive | Shaft drive (cardan) (final drive) | Chain (final drive) |
| Gearbox | Automatic | Automatic |
| Primary Drive | - | 1/2 x 3/16´ chain |
| Chassis |
| Frame Type | Steel tube backbone | Chrome-molybdenum steel central-tube frame |
| Suspension - Front | Telescopic fork 26mm | XACT 35 WP Upside-Down fork, Ø 35 mm |
| Suspension - Rear | Unit swingarm | XACT WP PDS mono shock |
| Rake | 25.5° | 24.0° |
| Trail | 50 mm / 2.0 in. | - |
| Wheel Travel - Front | 61 mm / 2.4 in. | 205 mm / 8.1 in. |
| Wheel Travel - Rear | 51 mm / 2.0 in. | 185 mm / 7.3 in. |
| Wheels & Brakes |
| Brakes - Front | Expanding brake (drum brake) | Single disc |
| Brakes - Rear | Expanding brake (drum brake) | Single disc |
| Rims | 3-spoke | Dunlop Geomax MX 53 tires |
| Tyres - Front | 2.50-10 | - |
Verdict
🏆
Winner on specs
2023 KTM 50 SX Factory
The 2023 KTM 50 SX Factory edges out the 2022 Yamaha PW50 thanks to its greater ground clearance, higher rear wheel travel and higher front wheel travel. Specifications are one part of the picture - dealer support, parts availability, and intended use all matter too.
Key Differences
2022 Yamaha PW50 - Advantages
- 📏Lower seat height: 475 mm vs 665 mm - accessible to a wider range of rider heights.
2023 KTM 50 SX Factory - Advantages
- 🏔️More ground clearance: 252 mm vs 94 mm - better clearance over rocks and obstacles.
- 🔄More rear wheel travel: 185 mm vs 51 mm - absorbs bigger hits and rough terrain better.
- 🔄More front wheel travel: 205 mm vs 61 mm - greater compliance over rough surfaces.
2022 Yamaha PW50 vs 2023 KTM 50 SX Factory - FAQs
Which bike is better for shorter riders, the 2022 Yamaha PW50 or the 2023 KTM 50 SX Factory?
The 2022 Yamaha PW50 has the lower seat at 475 mm, making it more accessible. The 2023 KTM 50 SX Factory sits higher at 665 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2022 Yamaha PW50 or the 2023 KTM 50 SX Factory?
Both are strong choices. The 2022 Yamaha PW50 has the edge in lower seat height, while the 2023 KTM 50 SX Factory stands out for greater ground clearance and higher rear wheel travel. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.