2003 Honda VTR 1000 SP-2 Specifications

Name: 2003 Honda VTR 1000 SP-2
Brand: Honda

No images available

Tap to enlarge

2003 Honda VTR 1000 SP-2 Overview

The 2003 Honda VTR 1000 SP-2 is a sport motorcycle built around 999 cc of displacement. Under the tank sits a V2 engine. The bore and stroke measures 100 x 63.6 mm. 2003 Honda VTR 1000 SP-2 delivers 102 of torque. From a practical standpoint, the 2003 VTR 1000 SP-2 tips the scales at 194 kg, carries a 18-litre fuel tank and offers a seat height of 820 mm. Scroll down for the complete 2003 Honda VTR 1000 SP-2 spec sheet covering every technical detail from suspension travel to tyre sizes.

2003 VTR 1000 SP-2 - Pros & Cons

Strengths

Factory engineering: The 2003 Honda VTR 1000 SP-2 represents Honda's engineering at the time, with a specification built around real-world usability.

Considerations

Tall seat height: The 820 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.

Owner Experiences & Common Issues

General ownership notes

The 2003 Honda VTR 1000 SP-2 has built a reputation for solid everyday reliability when serviced to schedule. As with any motorcycle of this era, documented service history is the single biggest indicator of long-term reliability when buying used.

VTR 1000 SP-2 - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2003 Honda VTR 1000 SP-2, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained VTR 1000 SP-2 should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any VTR 1000 SP-2. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

2003 Honda VTR 1000 SP-2 - Frequently Asked Questions

What engine does the 2003 Honda VTR 1000 SP-2 have?

The 2003 Honda VTR 1000 SP-2 uses a V2 engine with 999 cc of displacement.

How much does the 2003 Honda VTR 1000 SP-2 weigh?

The 2003 Honda VTR 1000 SP-2 weighs 194 kg. This is the manufacturer's dry figure.

How much power does the 2003 Honda VTR 1000 SP-2 make?

The 2003 Honda VTR 1000 SP-2 produces 102 of torque.

What is the fuel tank capacity of the 2003 Honda VTR 1000 SP-2?

The 2003 Honda VTR 1000 SP-2 has a 18-litre fuel tank.

Is the 2003 Honda VTR 1000 SP-2 suitable for shorter riders?

The 2003 Honda VTR 1000 SP-2 has a seat height of 820 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2003 Honda VTR 1000 SP-2 have?

The 2003 Honda VTR 1000 SP-2 uses Double disc at the front and Single disc at the rear.

What tyre sizes does the 2003 Honda VTR 1000 SP-2 use?

The 2003 Honda VTR 1000 SP-2 runs 120/70-17 front and 190/50-17 rear tyres. A good selection of sport, touring and all-weather rubber is available in these sizes.

Honda VTR 1000 SP-2 Spec Evolution

The Honda VTR 1000 SP-2 was produced across 2 model years (2003-2006). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2003	2006
Seat Height	820 mm / 32.3 in.	825 mm / 32.5 in.
Tyres - Front	120/70-17	120/70-ZR17
Tyres - Rear	190/50-17	190/50-ZR17
Power-to-Weight Ratio	0.7010 HP/kg	0.6843 HP/kg