2023 Husqvarna TX 300 Heritage Specifications

Name: 2023 Husqvarna TX 300 Heritage
Brand: Husqvarna

No images available

Tap to enlarge

2023 Husqvarna TX 300 Heritage Overview

The 2023 Husqvarna TX 300 Heritage is an enduro / off-road motorcycle built around 293.2 cc of displacement. Under the tank sits a Single cylinder, two-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation. The bore and stroke measures 72 x 72 mm. From a practical standpoint, the 2023 TX 300 Heritage tips the scales at 100.3 kg, carries a 8.50-litre fuel tank, offers a seat height of 948 mm and spans a 1485 mm wheelbase. Scroll down for the complete 2023 Husqvarna TX 300 Heritage spec sheet covering every technical detail from suspension travel to tyre sizes.

2023 TX 300 Heritage - Pros & Cons

Strengths

Fuel injection: The fuel injection injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.

Considerations

Tall seat height: The 948 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.

Owner Experiences & Common Issues

Throttle response and fuelling

The fuel injection on the 2023 Husqvarna TX 300 Heritage is generally well-regarded. Some owners note a slight hesitation at small throttle openings when cold, which clears once the engine reaches operating temperature. A quick visual check of the injector connectors during routine servicing is good practice on higher-mileage examples.

Valve clearance checks

Double Overhead Cams/Twin Cam (DOHC) engines should have valve clearances checked at the manufacturer's specified interval. Owners report that clearances can tighten over time on higher-mileage bikes, leading to slight ticking from the top end. Catching it early keeps the job simple and avoids more costly remediation.

TX 300 Heritage - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2023 Husqvarna TX 300 Heritage, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained TX 300 Heritage should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any TX 300 Heritage. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The TX 300 Heritage's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used TX 300 Heritage. This is a job many owners skip because the bike does not immediately feel wrong - but tight clearances accelerate valve seat wear. Ask for proof it has been done.

2023 Husqvarna TX 300 Heritage - Frequently Asked Questions

What engine does the 2023 Husqvarna TX 300 Heritage have?

The 2023 Husqvarna TX 300 Heritage uses a Single cylinder, two-stroke engine with 293.2 cc of displacement.

How much does the 2023 Husqvarna TX 300 Heritage weigh?

The 2023 Husqvarna TX 300 Heritage weighs 100.3 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2023 Husqvarna TX 300 Heritage?

The 2023 Husqvarna TX 300 Heritage has a 8.50-litre fuel tank.

Is the 2023 Husqvarna TX 300 Heritage suitable for shorter riders?

The 2023 Husqvarna TX 300 Heritage has a seat height of 948 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2023 Husqvarna TX 300 Heritage have?

The 2023 Husqvarna TX 300 Heritage uses Single disc at the front and Single disc at the rear.

What tyre sizes does the 2023 Husqvarna TX 300 Heritage use?

The front tyre size on the 2023 Husqvarna TX 300 Heritage is 90/90-21.

What fuel system does the 2023 Husqvarna TX 300 Heritage use?

The 2023 Husqvarna TX 300 Heritage uses Injection, providing precise fuelling across the rev range and reliable cold-start behaviour.

Key Specifications

Engine

Single cylinder, two-stroke

Power

N/A

Torque

N/A

Top Speed

N/A

Weight

100.3 kg / 221.1 lbs

Fuel Capacity

8.50 litres / 2.25 US gallons

Full 2023 Husqvarna TX 300 Heritage Specifications

Colours White/blue/yellow

Warranty 2 Years

Fuel Control Double Overhead Cams/Twin Cam (DOHC)

Engine Type Single cylinder, two-stroke

Displacement (ci) 17.89 cubic inches

Displacement (cc) 293.2 cc

Bore x Stroke (in,) 2.8 x 2.8 inches

Bore x Stroke (mm) 72.0 x 72.0 mm

Engine Detail Counter balancer shaft

Fuel System Injection

Engine Lubrication Mixture oil lubrication

Ignition Vitesco Technologies EMS

Starter Electric