2022 Husqvarna TX 300i Specifications

Name: 2022 Husqvarna TX 300i
Brand: Husqvarna

No images available

Tap to enlarge

2022 Husqvarna TX 300i Overview

The 2022 Husqvarna TX 300i is an enduro / off-road motorcycle built around 293.2 cc of displacement. Under the tank sits a Single cylinder, two-stroke engine running Double Overhead Cams/Twin Cam (DOHC) valve actuation. The bore and stroke measures 72 x 72 mm. From a practical standpoint, the 2022 TX 300i tips the scales at 101.5 kg, carries a 8.50-litre fuel tank, offers a seat height of 950 mm and spans a 1485 mm wheelbase. Scroll down for the complete 2022 Husqvarna TX 300i spec sheet covering every technical detail from suspension travel to tyre sizes.

2022 TX 300i - Pros & Cons

Strengths

Fuel injection: The fuel injection injection system delivers crisp throttle response and reliable cold starts regardless of altitude or temperature.

Considerations

Tall seat height: The 950 mm seat height will challenge shorter riders - tiptoeing at low speeds is something to factor into your decision.

Owner Experiences & Common Issues

Throttle response and fuelling

The fuel injection on the 2022 Husqvarna TX 300i is generally well-regarded. Some owners note a slight hesitation at small throttle openings when cold, which clears once the engine reaches operating temperature. A quick visual check of the injector connectors during routine servicing is good practice on higher-mileage examples.

Valve clearance checks

Double Overhead Cams/Twin Cam (DOHC) engines should have valve clearances checked at the manufacturer's specified interval. Owners report that clearances can tighten over time on higher-mileage bikes, leading to slight ticking from the top end. Catching it early keeps the job simple and avoids more costly remediation.

TX 300i - Buying & Maintenance Guide

What to check before buying

When inspecting a used 2022 Husqvarna TX 300i, start with the basics: check the service book for oil change frequency, inspect the chain and sprockets for wear, and look for oil seepage around the engine casings and rocker covers. A cold start test is invaluable - a well-maintained TX 300i should fire up cleanly and settle to a smooth idle within a few seconds.

Oil and filter changes

Regular oil changes are the single most important maintenance task on any TX 300i. Stick to the manufacturer's interval - typically every 6,000 km or once a year, whichever comes first. Always use the correct viscosity grade as specified in the owner's manual.

Fuel system care

The TX 300i's fuel injection system is durable but benefits from quality fuel and the occasional use of a fuel-system cleaner additive. If the bike has been stored for more than three months, drain and replace the fuel to prevent varnish deposits in the injectors.

Valve clearance service

Check that valve clearances have been adjusted at the correct intervals on any used TX 300i. This is a job many owners skip because the bike does not immediately feel wrong - but tight clearances accelerate valve seat wear. Ask for proof it has been done.

2022 Husqvarna TX 300i - Frequently Asked Questions

What engine does the 2022 Husqvarna TX 300i have?

The 2022 Husqvarna TX 300i uses a Single cylinder, two-stroke engine with 293.2 cc of displacement.

How much does the 2022 Husqvarna TX 300i weigh?

The 2022 Husqvarna TX 300i weighs 101.5 kg. This is the manufacturer's dry figure.

What is the fuel tank capacity of the 2022 Husqvarna TX 300i?

The 2022 Husqvarna TX 300i has a 8.50-litre fuel tank.

Is the 2022 Husqvarna TX 300i suitable for shorter riders?

The 2022 Husqvarna TX 300i has a seat height of 950 mm. This is towards the tall end of the spectrum and will require most riders under 175 cm to tiptoe at stops.

What brakes does the 2022 Husqvarna TX 300i have?

The 2022 Husqvarna TX 300i uses Single disc at the front and Single disc at the rear.

What tyre sizes does the 2022 Husqvarna TX 300i use?

The front tyre size on the 2022 Husqvarna TX 300i is 90/90-21.

What fuel system does the 2022 Husqvarna TX 300i use?

The 2022 Husqvarna TX 300i uses Injection, providing precise fuelling across the rev range and reliable cold-start behaviour.

Husqvarna TX 300i Spec Evolution

The Husqvarna TX 300i was produced across 3 model years (2020-2022). The table below highlights the key specifications that changed across the production run - useful whether you are comparing years or tracking down a specific variant.

Specification	2020	2021	2022
Engine Detail	Reed valves, counter balancer shaft	Reed valves, counter balancer shaft	Counter balancer shaft
Ground Clearance (in.)	14.6 inches	14.8 inches	14.8 inches
Ground Clearance (mm)	370 mm	375 mm	375 mm
Frame Type	25CrMo4 steel central-tube	25CrMo4 steel central-tube	Central double-cradle-type 25CrMo4 steel
Brakes - Front	Single disc. Magura twin-piston floating calliper	Single disc	Single disc
Brakes - Rear	Single disc. Magura single-piston floating calliper	Single disc	Single disc
Suspension - Front	WP-USD Xplor 48 with preload adjuster	WP-USD Xplor 48 with preload adjuster	WP XACT-USD, Ø 48 mm
Suspension - Rear	WP shock absorber with linkage	WP shock absorber with linkage	WP XACT Monoshock with linkage