2017 KTM 65 SX vs 2018 Husqvarna TC 50
Full specifications comparison •
2 motorcycles
Full Specifications
Differs
Same
| General |
| Colours | Orange/white/black | White/blue/yellow |
| Warranty | - | 2 Years |
| Dimensions |
| Ground Clearance (in.) | 11.0 inches | 9.9 inches |
| Ground Clearance (mm) | 280 mm | 252 mm |
| Seat Height | 750 mm / 29.5 in. | 684 mm / 26.9 in. |
| Wheelbase | 1,137 mm / 44.8 in. | 1,032 mm / 40.6 in. |
| Weights & Capacities |
| Oil Capacity (l) | - | 0.90 litres |
| Oil Capacity (Quarts) | - | 0.06 quarts |
| Dry Weight | 53 kg / 116.8 lbs | 41.5 kg / 91.5 lbs |
| Fuel Capacity | 3.50 litres / 0.92 gallons | 2.30 litres / 0.61 gallons |
| Engine |
| Bore x Stroke (mm) | 45.0 x 40.8 mm | 39.5 x 40.0 mm |
| Displacement (cc) | 64.85 cc | 49.00 cc |
| Displacement (ci) | 3.96 cubic inches | 2.99 cubic inches |
| Engine Type | Single cylinder, two-stroke | Single cylinder, two-stroke |
| Bore x Stroke (in,) | 1.8 x 1.6 inches | 1.6 x 1.6 inches |
| Engine Detail | Reed intake. | - |
| Fuel System | Carburettor. Mikuni TMX | Injection |
| Engine Lubrication | Mixture oil lubrication | Mixture oil lubrication |
| Ignition | AET digital EMS | Seletra 2p D36 |
| Starter | Kick | Kick |
| Drivetrain |
| Clutch | Wet, multi-disc clutch, Formula hydraulics | Centrifugal clutch (adjustable) |
| Final Drive | Chain | Chain |
| Gearbox | 6-speed | Automatic |
| Primary Drive | 14:48. Primary drive: 23:75 straight cut spur gear. | Single-speed automatic. Primary drive: 61. |
| Chassis |
| Frame Type | Central-tube frame with double-cradle | Central-tube frame with double-cradle |
| Suspension - Front | WP upside-down ? 35 mm | WP-USD, AER 35, 35 mm |
| Suspension - Rear | WP shock absorber | WP shock absorber |
| Rake | 25.5° | 24.0° |
| Wheel Travel - Front | 215 mm / 8.5 in. | 205 mm / 8.1 in. |
| Wheel Travel - Rear | 270 mm / 10.6 in. | 185 mm / 7.3 in. |
| Wheels & Brakes |
| Brakes - Front Diameter (in.) | 7.8 inches | 6.3 inches |
| Brakes - Front Diameter (mm) | 198 mm | 160 mm |
| Brakes - Rear Diameter (in.) | 6.3 inches | 6.3 inches |
| Brakes - Rear Diameter (mm) | 160 mm | 160 mm |
| Brakes - Front | Single disc. Four-piston calipers. Wave brake discs. | Single disc |
| Brakes - Rear | Single disc. Two-piston calipers. Wave brake discs. | Single disc |
| Rims | Black anodized, aluminum rims | - |
Verdict
⚖️
Too close to call
The 2017 KTM 65 SX and the 2018 Husqvarna TC 50 are evenly matched across the key measurable criteria. Your decision comes down to personal preference, riding style, and which brand's dealer network best suits your location.
Key Differences
2017 KTM 65 SX - Advantages
- 🏔️More ground clearance: 280 mm vs 252 mm - better clearance over rocks and obstacles.
- 🔄More rear wheel travel: 270 mm vs 185 mm - absorbs bigger hits and rough terrain better.
2018 Husqvarna TC 50 - Advantages
- 📏Lower seat height: 684 mm vs 750 mm - accessible to a wider range of rider heights.
- 🔧Fuel injection: Precise fuelling, better cold-start reliability, and lower maintenance requirements.
2017 KTM 65 SX vs 2018 Husqvarna TC 50 - FAQs
Which bike is better for shorter riders, the 2017 KTM 65 SX or the 2018 Husqvarna TC 50?
The 2018 Husqvarna TC 50 has the lower seat at 684 mm, making it more accessible. The 2017 KTM 65 SX sits higher at 750 mm. A seat height below 800 mm suits most riders; above 820 mm shorter riders may need to tiptoe.
Which should I buy, the 2017 KTM 65 SX or the 2018 Husqvarna TC 50?
Both are strong choices. The 2017 KTM 65 SX has the edge in greater ground clearance and higher rear wheel travel, while the 2018 Husqvarna TC 50 stands out for lower seat height and fuel injection. Visit dealers, arrange test rides, and factor in local parts and service costs - these often matter as much as the spec sheet.